Jew crusher
Jaw Crusher series have many advantages, such as big reduction ratio, even granularity, simple structure, reliable working condition, convenient repair and economic operation, which are widely used for mine, smelting, building material, road, railway, irrigation works, chemical and materials.
Instruction:
Before use this machine,you must check fastening pieces,especially check oil sites and bolts.You ensure that there are enough oil in the oil site,and tighten the bolt, clear up waste from the tune,then switch on ,in the petiod of production,equably feeding ,don't feed fully at one time .If ther are many materials in the tune,don't feed in order not to block machine.
Type&specification
（ inlet orifice L×W ） |
Max. feeding granularity
(m m ） |
Discharge hole adjusting extent （ m m ） |
Output
( t / h ) |
Assorted motor |
Spindle speed
（ r/
mi
n ） |
Dimension
（ L×W×H ）（ mm ） |
Weight (t) |
Type |
Power （ kw
） |
PEF150×250 |
125 |
10 ～ 40 |
1 ～ 4 |
Y132S － 4 |
5.5 |
300 |
875×745×935 |
0.6 |
PEF250×400 |
210 |
20 ～ 80 |
5 ～ 20 |
Y180L － 6 |
15 |
280 |
1108×1090×1392 |
2.2 |
PEF250×400 高 |
225 |
15 ～ 60 |
9 ～ 35 |
Y220L1 － 6 |
18.5 |
320 |
1320×1210×1220 |
3 |
PEF400×600 |
350 |
40 ～ 110 |
25 ～ 64 |
Y250M － 8 |
30 |
275 |
1700×1742×1530 |
6.7 |
PE500×750 |
425 |
50 ～ 100 |
28 ～ 60 |
Y280M － 6 |
55 |
275 |
1890×1916×1870 |
9.9 |
PEF600×900 |
500 |
75 ～ 200 |
56 ～ 192 |
Jr117 － 8 |
75 |
250 |
2600×3700×2400 |
16.8 |
PE900×1200 |
750 |
100 ～ 200 |
80 ～ 160 |
JR126-8 |
110 |
200 |
3765×3166×3025 |
50 |
PEX150×750 |
120 |
10 ～ 50 |
8 ～ 35 |
Y220L1 － 6 |
15 |
300 |
1215×1521×1031 |
3.5 |
PEX250×750 |
210 |
15 ～ 50 |
13 ～ 45 |
Y225M － 6 |
22 |
300 |
1400×1691×1412 |
4.9 |
PEX250×1000 |
210 |
15 ～ 50 |
15 ～ 50 |
Y25M － 6 |
30 |
280 |
1530×1992×1380 |
6.4 |
PEX250×1200 |
210 |
15 ～ 50 |
20 ～ 60 |
JR115-8 |
37 |
330 |
1840×2192×1580 |
7.7 |
